OZO Aviator 8K Dual-Shielded Coiled USB Cable, Painted Metal Connectors

The heavy-duty one

This is the OZO Aviator cable built for people who run 8000 Hz keyboards and want nothing between the board and the PC that could get in the way. It is a 6 mm cable, noticeably thicker than a standard coiled cable, with two layers of shielding around a core of more than two hundred strands of tinned oxygen-free copper, inside a double-layer nylon braid and finished with painted metal connectors and a screw-lock aviator joint. It is a substantial thing to have on the desk, and it comes in its own zipped case so the coil keeps its shape when it is not plugged in.

The computer end is clever: a USB-C plug that lives inside a removable USB-A shell. Leave the shell on and it is a USB-A to USB-C cable for a desktop; slide it off and it is USB-C to USB-C for a laptop or a USB-C hub, so there is no separate adapter to lose.

What is inside the braid

Aluminium foil shield

Wraps the conductors to keep out interference from the monitor, the PSU and whatever else is under the desk.

200+ strand copper core

Tinned oxygen-free copper, five conductors, for low resistance and clean, fast data at high polling rates.

Metal mesh shield

A second, braided shield over the foil, so the signal stays stable across the full length and through the coil.

Double nylon braid

Two layers of nylon sleeving on the outside, for a cable that holds its coil, resists scuffs and does not fray at the connectors.

Made for 8K

Magnetic switch and 8000 Hz keyboards push a lot more data down the cable than a standard board, and they are the ones that show up a poor cable with dropouts or unstable polling. That is what the dual shielding and the thick copper core are here for. The aviator connector is a five-pin screw-lock plug with a painted metal housing; once it is twisted shut it stays shut, and the two halves of the cable separate in a second when you want to move the keyboard or swap the coil. If an 8K board ever stutters, plug the USB-A end into a USB 3.0 port, which supplies more current than USB 2.0.

Measurements

Straight section (USB-A/USB-C to aviator) approx. 120 cm
Aviator to coil approx. 8 cm
Coiled section approx. 15 cm
Coil to USB-C plug approx. 8 cm
Cable diameter 6.0 mm
USB-C plug (keyboard end) metal housing approx. 10 mm wide, 8.3 mm thick, 5 mm plug depth
Conductors 5 core, 200+ strand tinned OFC
Shielding aluminium foil plus metal mesh
Outer double-layer nylon braid
Connector 5-pin screw-lock aviator, painted metal
Interfaces USB-A to USB-C, or USB-C to USB-C with the USB-A shell removed

Check your port first

Because the cable is 6 mm thick and the USB-C plug has a metal housing, the keyboard end is larger than a normal data cable. It fits keyboards with a port on the back edge or in a shallow recess. Keyboards with a deeply recessed port, or a port on the underside of the case, will not take it. If you are not sure about your board, send us the model before ordering and we will check.

Optional weight bar

A matching weight bar, sold separately, slides inside the coil to hold it straight and stop it springing about. It is a solid steel rod, 18 cm long and 1.2 cm across, with 2.5 cm screw caps at each end that unscrew so the bar can be threaded through the coil and closed again. The bars are not CNC machined, so a small mark in the finish is possible.

Q&A & Specifications

Questions & Answers

How is this different from the standard OZO Aviator cable?

Thicker cable (6 mm against 4.5 mm), two layers of shielding, a five-core copper bundle, painted metal connectors, a removable USB-A shell for USB-C to USB-C use, and a zipped storage case. The standard cable has a slimmer plug that fits more recessed ports.

Will it handle 8K polling?

Yes, that is what the shielding and copper core are for. Use a USB 3.0 port on the computer for the steadiest supply.

Does it charge wireless keyboards?

Yes. It works as a charging and data cable for any keyboard with a USB-C port.

Is the weight bar included?

No, it is sold separately so you can choose the colour.

Specifications

Product: OZO Aviator 8K Dual-Shielded Coiled Cable
Type: USB-C keyboard end, USB-A or USB-C computer end (removable shell)
Connector: 5-pin screw-lock aviator, painted metal housing
Length: approx. 120 cm straight, 15 cm coil, 8 cm tails either side of the aviator
Cable diameter: 6.0 mm
Core: 5 conductors, 200+ strand tinned oxygen-free copper
Shielding: aluminium foil and metal mesh
Braid: double-layer nylon
Polling: built for 8000 Hz
In the box: cable, zipped storage case
Weight bar: sold separately, 18 x 1.2 cm steel

Inside the box

single coiled cable / weight bar sold separately in this listing

Compatibility

Works with any keyboard that has a USB-C port, wired or wireless, including 8K magnetic switch boards; plug the USB-A end into a USB 3.0 port for the steadiest power. Fits directly on most keyboards, including Akko, ATK, AULA, CIY, Dareu, Drunk Deer, GANSS, Hyeku, IQUNIX, Keydous, KZZI, Lofree Flow, Machenike, Mad Catz, MCHOSE, MelGeek, Rainy75, Redragon, RK, ROG, Varmilo, VGN, Womier, WOB, Wooting 60 and Zoom65 models. Keyboards with deeply recessed ports need a short USB-C extension: Akko PC75B, Durgod K320, FL Esports MK870, CMK98, CMK99, 680 and OG104, Irok FE87 and FE104, Jingzao K2, Keydous NJ80, Keyverse Infi100, Langtu GK102, Looting 68, mod003, Drunk Deer A75 Pro, CK108 magnetic. Not compatible: FL Esports FL980 single and dual mode, Q7, F97, OG80, FL750, FK680 Pro, CMK680, and HyperX Alloy Origins. Computers with USB-C only need a USB-A to USB-C adapter.

Same caveats as the description: the brand translations and the Redragon/Monsgeek M61 question stand, and add cable colours to Row 2 once you have the variant list.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?