LUMINKEY98 V2 98% mechanical keyboard in Smoky Ink Gray, L9 White and Stardust Silver

LUMINKEY98 V2: 98% Tri-Mode Wireless Custom Mechanical Keyboard with Numpad

The full-size board, the custom way

Most people who need a numpad end up with a full-size keyboard that looks like office equipment. The LUMINKEY98 V2 is the alternative: a 98% layout that keeps every key a spreadsheet or a shortcut-heavy workflow needs, packed into a CNC-machined 6063 aluminium case 400 mm wide, with the fit, sound and finish of a custom kit and none of the assembly. It arrives built, with Astral linear switches, dye-sub PBT keycaps and a tri-mode PCB polling at 8000 Hz over both cable and 2.4 GHz.

The V2 is a rework of the original LUMINKEY98 built from owner feedback. The screws are gone from the outside, hidden behind angled lock modules at the corners. The top mount has become a PCB gasket mount. Two "front tooth" split keys above the main block carry hidden RGB that doubles as the Caps Lock and layer indicators. Per-key RGB is in for the first time, the battery has grown from 4400 mAh to 6000 mAh with fast charging, and the firmware is open to QMK and VIA. Four finishes: L9 White, Smoky Ink Gray, Stardust Silver and Midnight Black, with an orange accent on the badge key.

LUMINKEY98 to 98 V2

LUMINKEY98 LUMINKEY98 V2
Design Visible external screws Hidden screws behind angled lock modules; front tooth split keys with hidden RGB indicators
PCB Tri-mode, no RGB Tri-mode, dual 8K, full per-key RGB, OTA updates
Mount Top mount PCB gasket mount
Switches Sylva Astral
Battery 4400 mAh 6000 mAh, fast charging
Firmware Web driver QMK/VIA or LUMINKEY Web Drive

Numpad on the left or the right

The number cluster can sit on the right, as usual, or move to the left of the main block for a southpaw layout that keeps the mouse closer to the shoulder. It is the same keyboard either way; the modules swap and the firmware follows. For right-handed users who spend the day on a mouse, a left-hand numpad is one of those changes that is hard to go back from once tried.

The case sits at a 7 degree angle with a 19.9 mm front height, low enough to type on without a wrist rest, and a striped aluminium weight closes the underside.

LUMINKEY98 V2 numpad cluster and orange badge key on the L9 White colourway

Gasket mount, eight layers

The 1.5 mm polypropylene plate and the PCB sit on gaskets rather than screws, so the whole assembly floats inside the case and flexes slightly under heavy typing. Around it is the full stack: 3.5 mm Poron plate foam, a 0.5 mm IXPE switch pad, a PET sheet, 2 mm hot-swap foam and two 1 mm layers of bottom foam over the aluminium weight. The PCB has no flex cuts by design, which keeps the feel consistent from the alphas out to the numpad, and the stabilisers are plate-mounted and lubed at the factory.

Exploded view of the LUMINKEY98 V2: keycaps, switches, top case, PP plate, Poron, IXPE, PET, PCB, foams, bottom case and aluminium weight

Astral linear switches

The stock switch is LUMINKEY's Astral linear: 45 gf to actuate, 50 gf at the bottom, 2.0 mm pre-travel and 3.5 mm total travel. A medium-light linear with a smooth, slightly cushioned bottom-out that suits the foam stack. The sockets are hot-swap and take both 3-pin and 5-pin MX switches, so the Astrals are a starting point rather than a commitment.

LUMINKEY Astral linear switch specs: 45 gf operating force, 50 gf bottom-out, 2.0 mm pre-travel, 3.5 mm travel

Keycaps by Fingertip Creative Studio

The keycap set was designed for the V2 with Fingertip Creative Studio: dye-sublimated PBT in Cherry profile, with a muted two-tone of charcoal and light grey on the dark boards and warm grey and cream on the white, a single orange badge key, and small secondary legends. Dye-sub means the legends are in the plastic, not on it, so they stay sharp for the life of the board.

LUMINKEY98 V2 custom keycap design, Cherry profile row heights
Dual 8K

8000 Hz polling over USB-C and over the 2.4 GHz receiver, with Bluetooth as the third mode for a laptop or tablet.

Per-key RGB, 6000 mAh

South-facing per-key RGB with wave, ripple and breathing effects, on a fast-charging 6000 mAh battery, up from 4400 mAh on the V1.

QMK/VIA or Web Drive

Choose the QMK/VIA firmware for full open-source remapping, or LUMINKEY's Web Drive with OTA updates. Windows, macOS and Linux.

LUMINKEY98 V2 tri-mode: USB-C, Bluetooth, 2.4 GHz at 8K LUMINKEY Web Drive software for remapping and lighting

Real Product Photos

A closer look at the LUMINKEY98 V2 in real photos. Pick a finish, swipe or scroll through the strip, and tap any image to open it full size. Midnight Black is not pictured.

Q&A & Specifications

Questions & Answers

QMK/VIA or Web Drive?

QMK/VIA if you want open firmware and VIA's drag-and-drop remapping. Web Drive if you prefer LUMINKEY's own browser configurator with over-the-air updates. The hardware is identical; only the firmware differs.

Can I move the numpad to the left?

Yes. The number cluster can be set up on either side of the main block.

Does it take other switches?

Yes. The hot-swap sockets accept 3-pin and 5-pin MX switches, mechanical only.

Does 8K work wirelessly?

Yes, over the 2.4 GHz receiver as well as the cable. Bluetooth runs at a standard rate.

Specifications

  • Model: LUMINKEY98 V2
  • Type: finished keyboard
  • Layout: 98% ANSI, numpad left or right
  • Case: CNC 6063 aluminium, anodised or powder coated, aluminium weight, hidden screws with angled lock modules
  • Colours: L9 White, Smoky Ink Gray, Stardust Silver, Midnight Black
  • Mount: PCB gasket
  • Plate: 1.5 mm PP
  • PCB: tri-mode hot-swap, 3-pin and 5-pin, no flex cuts, pogo-pin connection
  • Dampening: 3.5 mm Poron plate foam, 0.5 mm IXPE switch pad, PET, 2 mm hot-swap foam, 2 x 1 mm bottom foam
  • Switches: Astral linear, 45 ± 5 gf operating, 50 ± 5 gf bottom-out, 2.0 ± 0.4 mm pre-travel, 3.5 ± 0.2 mm travel
  • Stabilisers: plate-mounted, factory lubed
  • Keycaps: dye-sub PBT, Cherry profile, by Fingertip Creative Studio
  • Lighting: south-facing per-key RGB; hidden RGB indicators in the front tooth keys
  • Connectivity: USB-C wired, 2.4 GHz, Bluetooth
  • Polling rate: 8000 Hz wired and 2.4 GHz
  • Battery: 6000 mAh, fast charging
  • Firmware: QMK/VIA or LUMINKEY Web Drive with OTA
  • Compatibility: Windows, macOS, Linux; NKRO
  • Typing angle: 7°
  • Dimensions: approx. 400 x 136 mm, 19.9 mm front height
Specifications

Model: LUMINKEY98 V2
Type: finished keyboard
Layout: 98% ANSI, numpad left or right
Case: CNC 6063 aluminium, anodised or powder coated, aluminium weight, hidden screws with angled lock modules
Colours: L9 White, Smoky Ink Gray, Stardust Silver, Midnight Black
Mount: PCB gasket
Plate: 1.5 mm PP
PCB: tri-mode hot-swap, 3-pin and 5-pin, no flex cuts, pogo-pin connection
Dampening: 3.5 mm Poron plate foam, 0.5 mm IXPE switch pad, PET, 2 mm hot-swap foam, 2 x 1 mm bottom foam
Switches: Astral linear, 45 ± 5 gf operating, 50 ± 5 gf bottom-out, 2.0 ± 0.4 mm pre-travel, 3.5 ± 0.2 mm travel
Stabilisers: plate-mounted, factory lubed
Keycaps: dye-sub PBT, Cherry profile, by Fingertip Creative Studio
Lighting: south-facing per-key RGB; hidden RGB indicators in the front tooth keys
Connectivity: USB-C wired, 2.4 GHz, Bluetooth
Polling rate: 8000 Hz wired and 2.4 GHz
Battery: 6000 mAh, fast charging
Firmware: QMK/VIA or LUMINKEY Web Drive with OTA
Compatibility: Windows, macOS, Linux; NKRO
Typing angle: 7°
Dimensions: approx. 400 x 136 mm, 19.9 mm front height

Inside the box

LUMINKEY98 V2 keyboard with Astral switches and keycaps fitted, 2.4 GHz USB receiver, USB-C cable, keycap and switch puller.

Compatibility

Windows, macOS and Linux over USB-C, the 2.4 GHz receiver or Bluetooth, with NKRO. Hot-swap sockets accept any 3-pin or 5-pin MX mechanical switch. Takes standard ANSI keycap sets covering a 98% layout. QMK/VIA version is configured in VIA; Web Drive version in LUMINKEY’s browser configurator with over-the-air updates.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?