Keygeek TT Blue Linear Switches: Factory Lubed, Full Nylon, Clacky

A light linear that is not afraid to be heard

The TT Blue is a switch designed by TT Lab and made by Keygeek, and it is built around one idea: a full nylon housing that sounds clacky, full and high-pitched rather than soft and muted. The top is PA66 nylon. The bottom is a hardened PA66 nylon loaded with 60 percent glass fibre, moulded on a fresh tool to the designer's spec, which gives the bottom-out a hard, bright edge instead of the dull thud that plain nylon often produces. If your board is tuned for a crisp, lively sound and you want switches that join in rather than hush it, this is the character.

Underneath is an 18 mm KOS fine-wire spring at 43 to 48 g, so the travel is light and quick, with a stem of hardened LY, a dense, slick plastic that keeps the stroke smooth as the switch wears in. They arrive lubed from the factory, so they go straight into a hot-swap board or onto a PCB with no prep.

Clacky, full, high-pitched

Glass-fibre-reinforced nylon bottom housing for a sharp, bright bottom-out with body behind it.

Light and long

18 mm KOS spring, 43 to 48 g, for a fast, easy press with a firm return and no spring crunch.

Ready out of the bag

Factory lubed, hardened LY stem, 2.0 mm pre-travel and 3.6 mm total travel. Suited to gaming and typing alike.

Specifications

Model: Keygeek TT Blue
Designer: TT Lab
Type: linear
Spring: 18 mm KOS fine wire, 43 to 48 g
Pre-travel: 2.0 ± 0.3 mm
Total travel: 3.6 ± 0.1 mm
Stem: hardened LY
Top housing: PA66 nylon
Bottom housing: hardened PA66 nylon, 60% glass fibre (N6, new JJK mould)
Lube: factory lubed
Sound: clacky, full, high-pitched
Mount: MX-style, fits hot-swap and soldered boards

Inside the box

10 switches

Compatibility

Fits MX-style hot-swap keyboards with 5-pin sockets and works with standard MX-style keycaps.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?