OZO Aviator Coiled USB-C Cable for Mechanical Keyboards

The cable that finishes the build

A custom keyboard deserves a cable that looks like it belongs, and the OZO Aviator Coiled Cable is made for exactly that. It is a USB-C to USB-A cable in two halves joined by a GX12 aviator connector: a short coiled section that plugs into the keyboard and sits on the desk mat, and a 1.5 m straight run that goes to the computer. The coil adds colour and texture to the desk, the metal aviator plug gives it the look of a proper piece of hardware, and the whole thing comes apart in a twist when you want to move the keyboard or swap the coil for a different colour.

Underneath the braid it is a four-core cable rated for 3 A, so it carries data and charging for both wired and wireless keyboards, including magnetic switch boards polling at 8000 Hz.

Two braids

Macaron

A soft mesh braid over a TPU core, in smooth solid colours. Supple in the hand, lies flat and drapes nicely between the coil and the PC.

EVA Fishnet

A double braid: an open fishnet weave over a fine mesh underlayer, so the inner colour shows through the net. Resists dirt and abrasion and does not pick up dust the way plain sleeving can.

Built to be plugged in and left alone

The GX12 aviator connector is a four-pin metal plug with solid pins and a knurled screw collar, so once it is twisted shut it does not work loose and does not drop the connection if the cable is nudged. It carries the same 3 A at 5 V as the larger GX16 style and supports 8K polling; the smaller housing just sits neater on the desk. If a magnetic switch keyboard ever drops out over any cable, the usual cause is a USB 2.0 port that cannot supply enough current; moving to a USB 3.0 port on the computer fixes it.

The keyboard end is a slim USB-C plug, 25.3 mm long and 7.2 mm thick, with a 22 mm strain relief, sized to fit the recessed ports on most custom cases.

Measurements

Total length approx. 1.85 m
Straight section (USB-A to aviator) 150 cm ± 5 cm
Coiled section 15 cm ± 1 cm
Coil to USB-C plug 10 cm ± 3 cm
Aviator to coil 10 cm ± 3 cm
Cable diameter 4.5 mm
USB-C plug 25.3 x 11 x 7.2 mm, 22 mm strain relief
Cores 4 (4P)
Connector GX12 screw-lock aviator
Interfaces USB-C to USB-A
Rated current 3 A

Optional weight bar

A matching weight bar, sold separately, slides inside the coil to hold it straight and stop it springing about. It is a solid steel rod, 18 cm long and 1.2 cm across, with 2.5 cm screw caps at each end that unscrew so the bar can be threaded through the coil and closed again. Twelve colours: fluorescent green, fluorescent orange, purple, violet, white, red, pink, sky blue, mustard, gunmetal black, bright silver and gold. The bars are not CNC machined, so a small mark in the finish is possible.

Will it fit my keyboard?

The slim USB-C plug fits most keyboards. A few cases with deeply recessed ports need a short USB-C extension, and a handful do not accept an aviator cable at all. The lists below are from our own testing and customer reports, and we add to them as we go.

Fits directly Akko 3108 V2, 3098; ATK 68, RS7; AULA F87, F75, F99, F98; CIY 67, 68, 84; Dareu A84, A87, A98, 104, EK868, EK75; DK61, 67, 68, 84, 100; Drunk Deer A75, G65; FL Esports F11, F12, CMK87, GP87, FL980 tri-mode; GANSS HS98T, 108T, ES75T; Gravastar 75K; Hi75 aluminium, Hi8 SE; HM66; Hyeku X3, X5; IQUNIX EZ60, EZ63; Keydous NJ98; Keyverse Infi75; KZZI 980, K75; Lofree Flow; Looting 75; Machenike K500, K600; Mad Catz Fire68, MAD60, MAD68, Nano68; MCHOSE K99, G98, Zero75, Ace 60 Pro; MelGeek Made68, Made68 Ultra, Made84 Pro; Monsgeek M61; Rainy75; Redragon K621a; RK 68, 84, 87, 98, 987, R98; ROG Falchion Extreme, ROG Azoth Acce HFX; SKN Qinglong 4.0; TM680; Valkyrie VK75; Varmilo Muse65, Victory, Sea Melody EC V2; VGN V98 Pro, V98, X68, S99, N75, V87, A75; Womier M68HE; WOB Crush80; Wooting 60; Xinmeng X98, M87 Pro; Zoom65; and others
Needs a USB-C extension Akko PC75B; CK108 magnetic; Drunk Deer A75 Pro; Durgod K320; FL Esports MK870, CMK98, CMK99, 680, OG104; Irok FE87, FE104; Jingzao K2; Keydous NJ80; Keyverse Infi100; Langtu GK102; Looting 68; mod003
Not compatible FL Esports FL980 single and dual mode, Q7, F97, OG80 Wormhole, FL750, FK680 Pro, CMK680; HyperX Alloy Origins

Q&A & Specifications

Questions & Answers

Does it work with wireless keyboards?

Yes. It charges and runs any keyboard with a USB-C port, and the 3 A rating is plenty for boards with large batteries.

Will it handle 8K polling?

Yes. The four-core wiring and solid-pin aviator connector carry 8000 Hz with no trouble. Plug the USB-A end into a USB 3.0 port for the steadiest supply.

Is the weight bar included?

No, it is a separate purchase so you can match or contrast the colour.

Can I use it with a USB-C-only laptop?

With a USB-A to USB-C adapter, yes. The computer end of this cable is USB-A.

Specifications

Product: OZO Aviator Coiled Cable
Type: USB-C to USB-A, detachable coil
Connector: GX12 four-pin screw-lock aviator
Length: approx. 1.85 m total (150 cm straight, 15 cm coil)
Cable diameter: 4.5 mm
Braid: Macaron (mesh over TPU) or EVA Fishnet (double braid)
Cores: 4
Rated current: 3 A
Polling: supports 8000 Hz
USB-C plug: 25.3 x 11 x 7.2 mm
Weight bar: sold separately, 18 x 1.2 cm, steel, 12 colours

Inside the box

One OZO Aviator Coiled Cable in your chosen braid and colour: coiled USB-C section with aviator plug, straight USB-A section with aviator socket. Weight bar not included, sold separately.

Compatibility

Works with any keyboard that has a USB-C port, wired or wireless, including 8K magnetic switch boards; plug the USB-A end into a USB 3.0 port for the steadiest power. Fits directly on most keyboards, including Akko, ATK, AULA, CIY, Dareu, Drunk Deer, GANSS, Hyeku, IQUNIX, Keydous, KZZI, Lofree Flow, Machenike, Mad Catz, MCHOSE, MelGeek, Rainy75, Redragon, RK, ROG, Varmilo, VGN, Womier, WOB, Wooting 60 and Zoom65 models. Keyboards with deeply recessed ports need a short USB-C extension: Akko PC75B, Durgod K320, FL Esports MK870, CMK98, CMK99, 680 and OG104, Irok FE87 and FE104, Jingzao K2, Keydous NJ80, Keyverse Infi100, Langtu GK102, Looting 68, mod003, Drunk Deer A75 Pro, CK108 magnetic. Not compatible: FL Esports FL980 single and dual mode, Q7, F97, OG80, FL750, FK680 Pro, CMK680, and HyperX Alloy Origins. Computers with USB-C only need a USB-A to USB-C adapter.

Same caveats as the description: the brand translations and the Redragon/Monsgeek M61 question stand, and add cable colours to Row 2 once you have the variant list.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?