Gateron KS-33 Low Profile 2.0 switches with white bottom housing in Silver, Red, Blue and Brown

Gateron KS-33 Low Profile 2.0 Switches, White Bottom Housing

The slim switch, with a brighter floor

The KS-33 Low Profile 2.0 is Gateron's current slim mechanical switch, the one fitted to most low-profile hot-swap keyboards, and this version swaps the usual black bottom housing for white. Everything else is the 2.0 recipe: a POM stem running in a clear polycarbonate top over a nylon base, factory lubed, 3-pin, 12.2 mm tall. The white base changes one thing, and you see it every time the backlight comes on. Instead of the SMD LED shining up into a dark cavity, the light bounces off a white floor, so backlighting comes through the top housing brighter and more evenly, and shine-through legends get a cleaner glow.

Compared with the original KS-27, the 2.0 has longer pre-travel so accidental presses are rarer, and its inner positioning pole is 0.3 mm longer with the side poles 0.3 mm shorter, which cures the early, soft bottom-out the first low-profile switch was known for. Four weights are available here: Red, Brown, Blue and Silver.

Gateron KS-33 Low Profile 2.0 white bottom housing switches seated in a low-profile keyboard Red, Blue and Brown Gateron KS-33 Low Profile 2.0 switches in a row on a keyboard plate

Four weights

Red, linear

50 gf, 1.7 mm to actuate. Light to press, quick to return, with a soft rebound. The default choice for typing and gaming alike.

Brown, tactile

55 gf with a bump partway down the stroke, so you feel each keystroke register without the click. Moderate force and a clear return.

Blue, clicky

65 gf with a tactile bump and an audible click at actuation. The loudest and most definite of the four, for people who want to hear their typing.

Silver, speed linear

50 gf like the Red, but actuating at 1.2 mm instead of 1.7 mm. The quickest to fire, for gaming and for very light typists.

Small details that add up

The MX-style stem has a circular dust wall around it, keeping grit out of the contacts in a switch that sits closer to the desk than most. The transparent polycarbonate top is shaped to pass SMD LED light, and the white nylon base now reflects it. The spring is spring steel, the stem POM, and all four weights come lubed from the factory, so they go into a hot-swap board as they are.

Note that the KS-33 2.0 stands 12.2 mm tall against the KS-27's 11.75 mm. The footprint is the same, so they fit any keyboard built for Gateron low-profile switches; they are not a replacement for other brands' low-profile switches, which use different footprints.

Close-up of a Gateron KS-33 Low Profile 2.0 Silver switch with transparent top and white bottom housing
Gateron KS-33 Low Profile 2.0 Brown and Silver switches next to a low-profile keyboard and a bare plate Loose Gateron KS-33 Low Profile 2.0 switches showing white bottom housings and 3-pin underside

Side by side

Variant Type Operating force Pre-travel Total travel
Red Linear 50 ± 15 gf 1.7 ± 0.4 mm 3.0 ± 0.2 mm
Brown Tactile 55 ± 15 gf 1.7 ± 0.4 mm 3.0 ± 0.2 mm
Blue Clicky 65 ± 15 gf 1.7 +0.4/-0.3 mm 3.0 ± 0.2 mm
Silver Linear 50 ± 15 gf 1.2 ± 0.3 mm 3.0 ± 0.2 mm

Q&A & Specifications

Questions & Answers

What does the white bottom housing do?

It reflects the keyboard's backlight instead of absorbing it, so the switch glows brighter and more evenly. Feel and sound are the same as the black-bottom KS-33 2.0.

Which keyboards do these fit?

Any hot-swap keyboard made for Gateron low-profile switches, KS-27 or KS-33. They do not fit boards built for other brands' low-profile switches.

Red or Silver?

Same weight. Silver fires 0.5 mm earlier, which gamers like and some typists find too eager. If you are unsure, go for Red.

Are they lubed?

Yes, all four weights come factory lubed. Gateron's black-bottom range skips lube on the Blue; check the pack if that matters to you.

Specifications

  • Model: Gateron KS-33 Low Profile 2.0, white bottom housing
  • Variants: Red (linear), Brown (tactile), Blue (clicky), Silver (speed linear)
  • Stem: POM, MX-style with dust wall
  • Top housing: transparent polycarbonate
  • Bottom housing: white nylon
  • Spring: spring steel
  • Pins: 3-pin
  • Lube: factory lubed
  • LED support: SMD
  • Lifespan: up to 60 million cycles
  • Height: 12.2 mm (KS-27: 11.75 mm)
  • Compatibility: keyboards designed for Gateron low-profile switches
Specifications

Gateron KS-33 Low Profile 2.0 mechanical switch with white nylon bottom housing and transparent polycarbonate top. Red: linear, 50 ± 15 gf, 1.7 mm pre-travel. Brown: tactile, 55 ± 15 gf, 1.7 mm pre-travel. Blue: clicky, 65 ± 15 gf, 1.7 mm pre-travel. Silver: speed linear, 50 ± 15 gf, 1.2 mm pre-travel. All variants 3.0 ± 0.2 mm total travel, POM stem with dust wall, spring steel spring, 3-pin, factory lubed, SMD LED support, rated up to 60 million cycles. Height 12.2 mm.

Inside the box

Gateron KS-33 Low Profile 2.0 switches in your chosen weight and pack size, loose in a sealed bag. No switch puller or keycaps included.

Compatibility

Fits hot-swap keyboards designed for Gateron low-profile switches, including boards that shipped with KS-27 or KS-33 switches, such as the Keychron K-series low-profile, Lemokey and Gateron’s own low-profile range. The footprint matches the KS-27, though the KS-33 is 12.2 mm tall against the KS-27’s 11.75 mm. Not compatible with Cherry MX Low Profile, Kailh Choc or other brands’ low-profile sockets. Works with low-profile MX-stem keycaps.

Warranty

1 year manufacturer's warranty.

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?