Gateron 25-in-1 mechanical keyboard tool kit with electric screwdriver on a desk beside switches

Gateron 25-in-1 Mechanical Keyboard Tool Kit with Electric Screwdriver

Everything a build needs, in one box

Building or modding a keyboard means pulling keycaps, pulling switches, opening a case held by a dozen small screws, and keeping those screws from disappearing under the desk. Gateron's tool kit covers all of it in a single case: an electric precision screwdriver with twenty bits, a pair of fine tweezers, a pry tool for prising cases and plates apart, the Twins keycap and switch puller in one, and a magnetic tray that holds every screw you take out until it is time to put them back. The case itself is a hard shell with a backlit lid, so it looks like a piece of kit rather than a plastic tub.

The screwdriver is the heart of it. Case screws on a custom keyboard are small, there are a lot of them, and they strip easily. An electric driver takes them out and puts them back at a steady speed with one press of the button, and you finish the last turn by hand. The bits are S2 tool steel, 4 mm hex and 28 mm long, and the set runs well beyond keyboards: Phillips, flathead and hex for cases and plates, plus Torx, pentalobe, tri-point and tri-wing for laptops, phones, controllers and consoles.

Gateron tool kit laid out: electric screwdriver, 20 bits, Twins puller, tweezers, pry tool and case

What is in the case

Electric screwdriver

Pen-sized precision driver with a push-button motor for driving in and backing out, and a body you can turn by hand for the final tightening.

20 S2 steel bits

Phillips PH000, PH00, PH1; flathead SL1.5, SL2.0; hex H0.7, H0.9, H1.5, H2.0; pentalobe P2, P5; tri-point 2.3 and Y0.6, Y1; tri-wing W1.5; Torx T2, T3, T4; security Torx T6H, T8H.

Twins 2-in-1 puller

Gateron's combined keycap and switch puller: wire loop on one end for caps, sprung jaws on the other for switches.

Precision tweezers

Fine-tipped, for placing switch films, picking up springs and screws, and fishing stabiliser wires into position.

Multi-function pry tool

A flat spudger for lifting plates, separating case halves and opening switch housings without marking the surface.

Magnetic screw tray

Built into the case, so every screw you remove stays put, in order, until the board goes back together.

Pressing the button on the Gateron electric screwdriver kit Gateron tool kit case with backlit lid and bit storage The six tools in the Gateron kit: electric screwdriver, tweezers, pry tool, 20-piece bit set, Twins 2-in-1 DIY tool, magnetic screw tray

Bits for the rest of the desk too

Most keyboard cases need nothing more than a PH1 or a 2 mm hex, and the kit has both. The rest of the set is for the other things on your desk: pentalobe and Y-type bits for phones and laptops, tri-wing for game controllers, security Torx for consoles and electronics with tamper screws. It is the sort of driver that ends up living in a drawer by the desk and coming out for jobs that have nothing to do with keyboards.

Gateron tool kit bit specifications: S2 steel, 4 x 28 mm, 20 bits with Phillips, flathead, hex, pentalobe, tri-point, tri-wing and Torx sizes
Gateron Switch to Win tool kit retail box Gateron tool kit case open in its box showing the screwdriver Close-up of the Gateron tool kit case with G-Tool branding
Gateron tool kit case lid opening with light strip

Q&A & Specifications

Questions & Answers

What makes it 25-in-1?

Twenty bits plus the screwdriver, tweezers, pry tool, Twins puller and magnetic tray.

Will the bits fit other drivers?

Yes. They are standard 4 mm hex shank precision bits, so they work in any 4 mm precision driver.

Is an electric driver safe for keyboard cases?

Yes, for driving in and out. Stop before the screw seats and give the final quarter turn by hand, which is how precision drivers are meant to be used on aluminium and plastic.

Does the Twins puller work on all switches?

On any MX-style switch and keycap, mechanical or magnetic.

Specifications

  • Product: Gateron 25-in-1 Mechanical Keyboard Tool Kit
  • Includes: electric precision screwdriver, 20 bits, precision tweezers, multi-function pry tool, Twins 2-in-1 keycap and switch puller, case with magnetic screw tray
  • Bit material: S2 steel
  • Bit size: 4 mm hex shank, 28 mm long
  • Bit colour: grey
  • Bits: PH000, PH00, PH1; SL1.5, SL2.0; H0.7, H0.9, H1.5, H2.0; P2, P5; tri-point 2.3; Y0.6, Y1; W1.5; T2, T3, T4; T6H, T8H
  • Case: hard shell with backlit lid and bit storage
  • Colour: black
Specifications

Gateron 25-in-1 mechanical keyboard tool kit: electric precision screwdriver, 20 S2 steel bits (4 mm hex shank, 28 mm long, grey), precision tweezers, multi-function pry tool, Twins 2-in-1 keycap and switch puller, and a hard-shell case with backlit lid, bit storage and magnetic screw tray. Bits: Phillips PH000, PH00, PH1; flathead SL1.5, SL2.0; hex H0.7, H0.9, H1.5, H2.0; pentalobe P2, P5; tri-point 2.3; Y-type Y0.6, Y1; tri-wing W1.5; Torx T2, T3, T4; security Torx T6H, T8H. Colour: black.

Inside the box

Gateron tool kit case containing the electric screwdriver, 20-piece bit set, precision tweezers, multi-function pry tool, Twins 2-in-1 puller and magnetic screw tray, with charging cable and manual.

Compatibility

The Twins puller fits any MX-style keycap and switch, mechanical or magnetic. The bits cover the Phillips and hex screws used in most keyboard cases and plates, plus pentalobe, Y-type, tri-wing and Torx sizes for phones, laptops, game controllers and consoles. Bits are standard 4 mm hex shank and work in any 4 mm precision driver.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?