Consi Studio Adaptive Tuning-Free PCB-Mount Stabilisers

The housing does the tuning

Most stabiliser rattle comes from one thing: a wire that is never perfectly straight sitting in a housing that expects it to be. Consi Studio's answer is an elastic structure inside the housing, a flexible section that grips the wire and takes up the small bends and tolerance differences on its own, so the wire cannot chatter against the plastic on the way up or down. The practical effect is that the stabilisers go into the board as they come out of the bag, and the spacebar does not tick, ping or rattle. No clipping, no wire straightening, no evening with a brush.

The wire itself is 1.6 mm steel, gold-plated for a smooth, corrosion-free surface, and the set now ships with both a 6.25u and a 7u spacebar wire so one pack covers either layout. Teflon stabiliser pads go between housing and PCB for a crisper bottom-out and a cleaner sound, PC shims are included for 1.2 mm boards, and the whole set is screw-in PCB mount with washers so nothing works loose. Four finishes: Black Gold, Milky White, Black Transparent and White Transparent, to match the switches and show through a clear plate.

Elastic structure

A self-adapting flexible section in the housing absorbs wire bend and play, removing rattle and ping without tuning.

1.6 mm gold-plated wires

Thick, plated wire for a stiff, even spacebar. 6.25u and 7u both in the box, plus four 2u.

Pads, shims, screws

Teflon pads for a clearer bottom-out, PC shims for 1.2 mm PCBs, screws and washers for 1.2 to 1.6 mm boards.

In the pack

Stems 10
Housings 10
2u wires 4
6.25u wire 1
7u wire 1
Teflon pads 10
PC shims (for 1.2 mm PCB) 10
Screws 10
Washers 10

Enough for one spacebar (6.25u or 7u) and four 2u keys.

Q&A & Specifications

Questions & Answers

Do I need to lube them?

The elastic structure removes the rattle that lube usually masks, so they are designed to be fitted as supplied. A thin coat on the wire ends is optional for the quietest result.

Which PCB thickness?

1.2 to 1.6 mm. Fit the PC shims on a 1.2 mm board; leave them out on 1.6 mm.

Do I get both spacebar sizes?

Yes. The new packaging includes a 6.25u and a 7u wire, so the set suits either layout.

Is this the same as the Consi V3?

No. The V3 is a clip-in design with a slider-crank mechanism. This is the screw-in set with the elastic housing, which is the one to pick for a standard screw-in PCB.

Specifications

  • Brand: Consi Studio
  • Type: PCB-mount, screw-in
  • Mechanism: adaptive elastic housing structure, tuning-free
  • Wire: 1.6 mm gold-plated steel
  • Set: 1 x 6.25u, 1 x 7u, 4 x 2u
  • Colours: Black Gold, Milky White, Black Transparent, White Transparent
  • PCB thickness: 1.2 to 1.6 mm, PC shims included for 1.2 mm
  • Included: Teflon pads, PC shims, screws, washers
Specifications

Consi Studio adaptive tuning-free PCB-mount stabilisers, screw-in. Elastic housing structure that self-adjusts to the wire to remove rattle and ping without tuning. 1.6 mm gold-plated steel wires with both 6.25u and 7u spacebar wires included, plus four 2u. Teflon stabiliser pads for a clearer bottom-out, PC shims for 1.2 mm PCBs, compatible with 1.2 to 1.6 mm PCBs. Colours: Black Gold, Milky White, Black Transparent, White Transparent.

Inside the box

10 stems, 10 housings, 4 x 2u wires, 1 x 6.25u wire, 1 x 7u wire, 10 Teflon pads, 10 PC shims, 10 screws, 10 washers. Enough for one spacebar and four 2u keys.

Compatibility

For keyboards with screw-in PCB-mount stabiliser positions and PCB thickness from 1.2 to 1.6 mm; use the included PC shims on 1.2 mm boards. Covers either a 6.25u or 7u spacebar and four 2u keys (Shift, Enter, Backspace and one more). Not suitable for plate-mount keyboards.

Warranty

1 year manufacturer's warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?