Hard shell, soft centre

Top case, bottom case, back weight and badge are all CNC-cut aluminium, about 1.6kg of it. Put it on your desk and it doesn't go anywhere.

Inside, it's a softie. A polycarbonate plate and a slotted circuit board sit on gaskets, so every key gives a little when you press it. Typing feels cushioned and sounds low and round, and your fingers will notice the difference by about 4pm.

Story65 SE keyboard kit in red and cream under Story65 SE lettering

Five layers of hush

An empty aluminium case rings like a biscuit tin. This one comes stuffed: foam between the plate and circuit board, foam under every switch socket, two sound pads, and a bottom pad lining the case.

What's left is the sound of your switches, low and tidy. Put the right switches in and it's quiet enough for a shared office, so nobody starts a group chat about your typing.

Story65 SE aluminium cases in red, cream and pastel colours seen from above

Soft colours or full shine

The spray-coated range covers the two-tones, Milky White and Black. They're easy colours to build a desk around and easy to match with a keycap set.

The gloss range is anodised or electroplated, and each colour gets a metallic highlight in gold or silver. Same keyboard underneath, a lot more shine on top.

Engraved Story65 script on the back weight of a red Story65 SE

Swap anything, whenever

Every socket is hot-swap. Switches pull straight out and push straight in, 3-pin or 5-pin, so trying linears this month and tactiles next month costs you a switch puller and a bit of patience.

Keycaps are your call as well. The RGB faces south, so standard 65% sets fit without a fight, Cherry profile included.

Built Story65 SE with pastel keycaps next to open aluminium cases

Cut the cord (or don't)

Tri-Mode adds a 2.4GHz receiver, Bluetooth 5.0 and a 3000mAh battery, so you can run it wireless from your PC or pair it with a tablet or phone.

Wired is plain USB-C with no battery to think about. Both sit 20mm tall at the front, low enough that your palms don't look like a cat claw when typing.

Side profile of a red Story65 SE showing its low front edge

Small stuff, sorted

Lubed stabilisers

Spacebar, Shift and Enter sit on stabilisers lubed and tuned at the factory. The big keys stay smooth, and you won't hear them rattle.

Badge or extra key

The badge has its own RGB. Pop it out and fit a 67th key if you'd rather have another button than a bit of bling.

Remap and lighting

Windows software lets you move keys around and set up the lighting. Your Caps Lock can finally do something useful.

Q&A & Specifications

Questions & Answers

Which build type should I pick?

Barebone Kit [Disassembled] arrives as a box of parts: aluminium case, circuit board, plate, foams, gaskets and stabilisers. You build it from scratch, which is half the fun if you like that sort of thing.

Barebone Kit [Assembled] arrives as a built shell with the circuit board, plate and foams already inside. It usually has a few switches fitted to hold everything together. Add your own switches and keycaps.

Tiramisu Switches Pre-installed is the assembled kit with Rise Tiramisu linear switches in every socket. Just add keycaps.

Prebuilt comes with Rise Dream linear switches and keycaps installed. Plug it in and type.

Wired or Tri-Mode?

Wired connects over USB-C only and has no battery. Tri-Mode adds 2.4GHz wireless (receiver included), Bluetooth 5.0 and a 3000mAh battery.

What else do I need?

A USB-C cable, because there isn't one in the box. Every build type except Prebuilt needs keycaps, and the barebone kits need switches as well.

Specifications

  • Layout: 65%, 66 keys (67 with the badge removed)
  • Case: CNC 6063 aluminium (top, bottom, back weight, badge)
  • Finish: Spray-coated, or high-gloss anodised / electroplated
  • Mount: Gasket
  • Plate: Slotted polycarbonate (PC)
  • PCB: 1.2mm, per-key slotted, hot-swap (3-pin & 5-pin)
  • Lighting: South-facing RGB, RGB badge
  • Stabilisers: Plate-mounted, factory-lubed
  • Sound dampening: 5 layers (plate foam, switch socket foam, 2 sound pads, bottom pad)
  • Connection: Wired: USB-C. Tri-Mode: USB-C, 2.4GHz, Bluetooth 5.0
  • Battery: 3000mAh (Tri-Mode only)
  • Charging: 5V from a computer USB port; fast chargers and wall plugs not supported
  • Software: Windows (key remapping, lighting)
  • Works with: Windows, Android, iOS
  • Size: 346.3 x 112.7mm; 20mm front, 32mm rear
  • Weight: About 1.6kg
  • Badge colour: Set by case colour
  • In the box: Keyboard, cloth pouch, 2.4GHz receiver (Tri-Mode)
  • Not included: USB-C cable
Inside the box

- Keyboard (assembled or case + parts)
- cloth pouch
- 2.4GHz receiver (Tri-Mode)

Compatibility

• Compatible with MX-style mechanical switches (3-pin and 5-pin)
• Works with standard 65% keycap sets
• Suitable for wireless gaming, productivity, and general typing
• Compatible with Windows, macOS, and devices that support USB keyboards

Warranty

1 year manufacturer's warranty - further warranty provided at OZO's discretion depending on the situation

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?