Gateron KS-33 Low Profile Silent 2.0 Switches: Red, Brown, White and Black

Low profile, now quiet

The KS-33 Low Profile 2.0 is Gateron's slim switch, the one you will find in most low-profile hot-swap keyboards. It is an upgrade of the original KS-27, with longer pre-travel and total travel so it stops short of the accidental presses the first generation was known for, while still actuating sooner than a full-height switch. The Silent 2.0 takes that switch and fits damping rings on both sides of the stem, so the press and the return land on a soft pad instead of plastic on plastic. You get a low-profile board quiet enough for a shared office or a late night, and you keep the short, quick stroke that made you choose low profile in the first place.

Four versions, all factory lubed, all 1.7 mm to actuate and 3.0 mm to bottom out. Red is the light linear, White is lighter still, Black is the heavier linear for people who rest their fingers on the keys, and Brown adds a gentle bump for typists who want to feel the keystroke without hearing it.

Gateron KS-33 Low Profile Silent 2.0 spec table: Red linear 45 gf and Brown tactile 55 gf, 1.7 mm pre-travel, 3.0 mm total travel, pre-lubed, 3-pin
Silent rings on the stem

Damping spring rings embedded on both sides of the stem soften the bottom-out and the top-out, the two sounds that make a low-profile board clatter. Dual-rail guidance keeps the stem from wobbling.

Bottoms out where it should

The 2.0 design extends the inner positioning pole by 0.3 mm and shortens the side poles by the same, fixing the early, mushy bottom-out of the original low-profile switch.

Dustproof, light-friendly

An MX-style stem with a circular dust wall keeps debris out, and the clear polycarbonate top housing lets SMD and RGB backlighting through cleanly.

Pick your weight

Silent Red at 45 gf is the all-rounder, light enough for fast typing and gaming with a soft rebound. Silent White drops to 38 gf, the lightest of the set, for people who want almost no resistance under the fingertip. Silent Black sits at the top of the linear range, with a firmer press that resists accidental inputs. Silent Brown is the tactile, 55 gf with a rounded bump at the top of the stroke and a clear return.

Operating forces carry Gateron's ±15 gf tolerance, which is normal for low-profile springs of this length.

Gateron KS-33 Silent Low Profile White switch with force-travel diagram, 38 gf actuation, 1.7 mm pre-travel, 3.0 mm total travel

Side by side

Variant Type Operating force Pre-travel Total travel
Silent Red Linear 45 ± 15 gf 1.7 mm 3.0 ± 0.2 mm
Silent Brown Tactile 55 ± 15 gf 1.7 mm 3.0 ± 0.2 mm
Silent White Linear 38 ± 15 gf 1.7 ± 0.4 mm 3.0 ± 0.2 mm
Silent Black Linear 55 ± 15 gf 1.7 mm 3.0 ± 0.2 mm

Q&A & Specifications

Questions & Answers

Which keyboards do these fit?

Hot-swap keyboards built for Gateron low-profile switches, including the KS-27 and KS-33 generations. They are not a drop-in replacement for other brands' low-profile switches, which use different footprints.

Will they fit where my KS-27s were?

Yes, the footprint is the same. The KS-33 2.0 is 12.2 mm tall, a fraction higher than the KS-27, which matters only in the tightest cases.

How quiet are they?

Noticeably quieter than the standard KS-33 2.0, with the sharp bottom-out and top-out replaced by a soft thud. They are not silent in the literal sense; the spring and the keycap still make some sound.

Do they need lubing?

No. All four versions arrive factory lubed.

Specifications

  • Model: Gateron KS-33 Low Profile Silent 2.0
  • Variants: Red (linear), Brown (tactile), White (linear), Black (linear)
  • Pre-travel: 1.7 mm
  • Total travel: 3.0 ± 0.2 mm
  • Silencing: damping spring rings on both sides of the stem
  • Stem: POM, MX-style with dust wall
  • Top housing: transparent polycarbonate
  • Bottom housing: black nylon PA66
  • Spring: spring steel
  • Pins: 3-pin
  • Lube: factory lubed
  • LED support: SMD
  • Height: 12.2 mm
  • Compatibility: keyboards designed for Gateron low-profile switches
Specifications

1. Low-Profile 2.0 Red

Type: Linear

Operation Force: 50 ±15 gf

Finger Strike Feeling:

Smooth, vertical press

Fast & responsive

Light pressing force

Soft rebound

2. Low-Profile 2.0 Brown

Type: Tactile

Operation Force: 55 ±15 gf

Finger Strike Feeling:

Noticeable bump

Tactile feedback

Moderate pressing force

Clear rebound

3. Low-Profile 2.0 Blue

Type: Clicky

Operation Force: 65 ±15 gf

Finger Strike Feeling:

Fast tactile typing

Audible click sound

Moderate pressing force

Clear rebound

4. Low-Profile 2.0 Banana

Type: Tactile

Operation Force: 60 ±15 gf

Finger Strike Feeling:

Pronounced bump at the top

Strong tactile feedback

Higher pressing force

Clear rebound

Inside the box

45 or 110 Gateron KS‑33 switch set

Compatibility

Designed for low-profile mechanical keyboards (e.g., Keychron K3/K7, NuPhy Air series)

Compatible with hot-swap or solder-mount PCBs supporting low-profile MX stems

Warranty

1‑year manufacturer’s warranty

Got questions? 🤔

Do you have any questions, or unsure if this product is compatible with your setup?